Changing a tire in the middle of the road is a situation that can happen to anyone. A punctured or burst tire can be very troublesome, especially if you are far from a repair shop or in unfavorable weather conditions. Therefore, it is important to know the tools needed and how to change a car tire so you can do it yourself safely and quickly. Come on, follow the following article to find out the tools needed and also the stages in changing a car tire.
Before you start changing a car tire, make sure you have the following tools in the car. These tools are essential to ensure the tire replacement process runs smoothly and safely.
First, make sure you have a jack that is appropriate for the weight of your car. This jack will help you lift the car so that the damaged tire can be removed and replaced with a spare tire.
Next, you need a wheel wrench that matches the size of the nuts on your car's wheels. This wheel wrench is used to remove and tighten the wheel nuts. Make sure the wheel lock is in good condition and not damaged.
Make sure you have a spare tire in good condition and enough air in the car. This spare tire should be checked periodically to ensure it has sufficient air pressure and there is no damage.
Don't forget to keep a safety triangle in the car. The safety triangle is useful for signaling to other drivers that you are stopping on the side of the road. The use of a safety triangle is an important procedure in an emergency.
A flashlight or lighting device will bUseful if you have to change a tire in the dark.
Read Also: Indonesian Emergency Numbers You Must Know When Traveling
If you are forced to change a tire in the middle of a trip, here are the steps you can follow carefully and thoroughly to change your own car tire safely and effectively:
Move the car to a safe, level place and away from traffic. Make sure the area is large enough to change the tire comfortably.
Place a safety triangle a few meters behind the car to warn other drivers of your presence on the side of the road.
Use a wheel wrench to loosen the wheel nuts on the tires to be replaced. Do not remove it completely, just loosen it to make it easier when the tire is lifted.
Place the jack below the car's manufacturer's recommended lifting point, usually near the wheel to be replaced. Lift the car until the damaged tire is off the ground.
Once the car has been lifted safely using a jack, completely remove the wheel nuts that were loosened previously. Then remove the damaged tire from the car.
Install the spare tire by pointing the hole in the wheel heart upwards. Reinstall the wheel nuts by hand until they are tight to secure the new tire.
Slowly lower the car by loosening the jack until the spare tire touches the ground. Make sure the jack is removed carefully and safely.
Tighten the wheel nuts diagonally (across) with the wheel wrench to ensure all nuts are installed tightly and evenly.
Once all the lug nuts are tightened, double check to make sure none are loose. Make sure all components are installed properly before driving the car.
Read Also: Drained Battery: Causes, Signs, and Solutions
Be sure to check your car manufacturer's safety regulations and guidelines before changing your tires. To avoid emergency situations such as having to change tires in the middle of the road, it is important to always check the condition of the car before starting a trip. Make sure the tires are in good condition and have enough air, check the tire pressure regularly, and make sure you have all the necessary tools in your car.
So that your car is always in the best condition and ready for all situations, trust its maintenance to Prima Autocare and Sales. We provide professional and reliable car maintenance and repair services. With experienced technicians and modern equipment, we are ready to keep your car in top condition. Don't let small problems ruin your trip, leave the maintenance to us at Prima Autocare and Sales.
